The fastest way to share a prototype with a client is a view-only link that opens in a browser, with access set so the client does not need an account. For a client who needs to tap through it on a phone or tablet, or open it in a meeting with no Wi-Fi, deliver it to a real device instead. This guide covers both routes, the permission settings to check first, and a short test that catches most access problems before the client sees them.

Yonderly
Keep Client Prototypes Current
Yonderly keeps shared files updated and accessible, helping clients review interactive presentations online or offline.

TL;DR

  • Send a view-only prototype link for quick design review. Use a published page or a device when the client has to use, revisit or present the work.
  • Check who can open the link: anyone, invited people only, or your organization only. Clients without accounts need public or password-protected access.
  • Share the prototype, not the working file. Prototype-only links, shared slices and view modes keep editable files private.
  • Open the final copied link in a private browser window before you send it. Changing prototype options changes the URL.
  • For real-device review, offline demos and updates after sending, we built Yonderly to put the prototype on the client’s device and keep it current.

Table of Contents

Pick the right way to share

There are three common ways to put a prototype in front of a client. Each fits a different moment in a project.

MethodBest forClient needsWatch out for
Prototype link from your design toolEarly review, quick feedback roundsA browser, sometimes an accountAccount prompts, editable file exposure
Published website or hosted pageClients who will bookmark, share or return to itA browser and the URLNeeds publishing steps and a clear update routine
Delivery to a real deviceTouch testing, in-person pitches, kiosks, offline demosThe device, or a link to the contentNeeds a distribution tool

One published comparison of the first two options suggests sending a prototype link for design review and a published website when a client needs to use, share or bookmark it. That matches how most agency and in-house projects run. Review rounds start with links. The final handover usually needs something sturdier.

The exact button names vary by design tool, but the flow is the same. Using one widely used design tool as the example, the official steps are: open the design file, click Present, choose Share prototype, adjust the settings and permissions, then copy the link.

  1. Open the prototype in presentation view. Start from the flow you want the client to see, not from a random frame.
  2. Open the share panel. Look for a Share prototype or Share button.
  3. Set the audience. Choose who can open it: anyone with the link, invited people, or people in your organization.
  4. Set the permission. For a client, choose view only. Add comments only if you want feedback in the tool.
  5. Adjust prototype options. Set the starting screen, scaling and whether hints or hotspots show.
  6. Copy the final link. Do this after every settings change, not before.
  7. Test it. Follow the test in the section below, then send it.

Write a short message with the link. Tell the client what to look at, which flow to tap through, and the date you need feedback by. A link with no context invites vague answers.

Do clients need an account to view a prototype?

It depends on the audience setting and the tool. This is the question behind most of the frustration in design forums, so check it before you send anything.

In the tool used as our example, public sharing lets people outside your organization, or colleagues without an account, open shared resources. The same page explains that password-protected links ask the viewer for a password, and that when public links are turned off, only organization members or invitees can get in.

Phones add a second wrinkle. The tool’s mobile app requires an account, while a publicly shared prototype can still be opened and used in a mobile browser without one. So if your client is on a phone, tell them to tap the link and open it in the browser rather than downloading the app.

Other tools are stricter. In one popular design-review product, the Only invited people setting makes recipients log in to their associated account. That is a reasonable choice for sensitive work, but it adds a step for every stakeholder.

A simple rule works well:

  • Public link, view only: low-risk concepts, wireframes, early directions.
  • Password-protected link: work under NDA, unreleased products, pricing screens.
  • Invited people only: a small client team that already has accounts.

Keep the working file private

Clients rarely need your layers, notes and abandoned explorations. Sharing the prototype only is cleaner and safer.

In the example tool, a prototype-only link shares a design without giving access to the full design file, and it is available on paid plans. On the free tier, there is a gap: viewers of a prototype shared from presentation view can open the source file through the dropdown next to the file name and choosing Open in editor. If your project files hold anything you would not hand over, confirm what a viewer can reach before sharing.

Other tools solve the same problem differently:

If you manage several client projects, make one habit: create a separate share link per client and per round. That way you can retire one link without breaking the others.

Settings to check before you send

Run through this list every time. It takes two minutes.

Who can open it

In the example tool, audience settings let you pick anyone, invited people, or people in an organization or workspace, where available. Pick the narrowest option that still works for your client.

Password and expiration

Paid plans offer password protection on files, and the Enterprise tier offers link expiration. Sketch previews can also carry a password or an expiration date. Send a password in a separate message from the link.

Version and freshness

Some review links are snapshots. An Adobe XD review link shows the project version from when the link was created, so clients will not see changes made afterward. If you revise the design, create a new link and say which version it is. Otherwise a client reviews the old version and approves the wrong thing.

Version and freshness

Hints, toolbars and comments

Sketch lets you hide hotspots and hints, or the toolbar and navigation, when sharing a prototype. Hiding them makes the prototype feel like a finished product. Keep them on when the client is still learning how to move through it.

Clients can also comment on Sketch prototypes in a web browser, and everyone sees existing comment threads. Adobe’s review flow lets clients leave pinned comments on specific parts of a design. Pinned comments beat email feedback like “the button on page three”, but remember that other reviewers can read them.

Hints, toolbars and comments

Penpot lets you destroy a shared prototype link, after which it is no longer available. Whatever tool you use, find out how to revoke a link before you need to. Revoke old links when a project ends.

Most access problems show up only when you view the link as an outsider. You are logged in, so your own browser hides them.

  1. Set access to Anyone (or your chosen audience) and permission to view only.
  2. Copy the URL last. Changing prototype options modifies the URL, so the link you copied earlier may be the wrong one.
  3. Open a private or incognito window. Noble Desktop recommends testing a shared link this way, while logged out.
  4. Paste the link and confirm the prototype opens without a sign-in prompt, starts on the right screen and runs the full flow.
  5. Open it on a phone, using the mobile browser, if the client will.

One community thread reports that a link copied from outside the active prototype can prompt viewers to log in. Copy the link from the prototype’s own share panel, not from the browser address bar of the editor.

Add a review step for client deliverables

When several people touch the same deliverable, a missed step is the usual cause of a wrong link going out. Decide who approves the link, the settings and the message before it is sent. A review and approval workflow is the same idea applied to written content: nothing goes out until someone has signed off. For prototypes, a two-line checklist in your project tracker does the job: link tested logged out, and password sent separately.

Most prototype sharing stops at a link in an email. That works until the client says it feels different on their tablet, or the meeting room has no signal, or you fix a screen and the client is still looking at last week’s version.

We built Yonderly for those moments. Our approach treats the prototype as content that lives on the client’s device. You upload a replacement file and devices start swapping to it in about 5 seconds, according to our own measurements. With Yonderly LiveScreen, a device opens its content automatically and keeps it running, even offline.

We think the best client review combines both: a quick link for early rounds, then the real thing on a real device once the design settles. You see how it behaves where it will actually be used, and the client does not have to hunt for the latest version.

Paul

Some client situations push past what a browser link handles well.

  • Touch and screen testing. A prototype on a laptop does not show how a layout feels on a tablet in a showroom.
  • No reliable connection. Client offices, factory floors and trade shows often have weak Wi-Fi.
  • Frequent revisions. Every new round means a new link and a new message to explain which one is current.
  • Unattended use. A tablet on a counter or stand needs to open the right content on its own.

In those cases, Yonderly gives you a different route. It is a no-code platform for real-time file updates, offline access and centralized device distribution, running on iOS, Android, Windows and the web. You can deploy HTML, forms and prototypes, and preview them on a real device before the client sees them. See how content testing on real devices works, or read about the platform overview.

A practical flow

  1. Export your prototype as HTML or a file your tool supports.
  2. Upload it to your Yonderly library.
  3. Preview it on a real device to check touch behavior and layout.
  4. Assign it to the client’s device or share a link or QR code.
  5. When the design changes, upload the replacement file. Devices pick up the new version without anyone re-sending anything.
  6. Review engagement analytics to see what was opened.

If the client will present your work in person, our guide to offline client demos covers presenting without Wi-Fi. For iPad delivery without building an app, see how to deliver client content on an iPad. If your concern is access control, sharing presentations securely with clients explains the options, and content expiration and scheduling help you retire material when a round closes.

Try it on your next client round

Yonderly is subscription software with a free trial, and you can set up a library in minutes without long-term contracts. Pricing is per month: Standard is $29 per month per Admin, Plus is $250 per month per SMB, and Max is $750 per month. Additional devices cost $6 per month on Standard, $5 on Plus and $3 on Max. See the current details on the pricing page.

Yonderly

Want a low-effort way to start? Run a small pilot with one client and one device. Our 7-day pilot for interactive presentation sharing walks through it. You can also try Yonderly free and upload your first prototype today.

Mistakes that slow client feedback

  • Sending the link before testing it logged out. The client hits a sign-in wall and writes back instead of reviewing.
  • Sharing an editable file. Use prototype-only links, shared slices or view modes.
  • Mixing versions. Snapshot links go stale. Label each link with a version or date.
  • No instructions. Say what to click, what to ignore and what feedback you need.
  • Leaving old links live. Revoke or expire links when a round ends.
  • Collecting feedback in five places. Choose one channel, comments in the tool or one email thread, and say so in your message.

FAQ

How do I share a prototype with a client who has no account?

Set the prototype’s audience to anyone with the link and the permission to view only, or use a password-protected link. Test it in a private window. On phones, tell the client to open the link in the mobile browser, since the design tool’s own mobile app asks for an account.

Can a client see my working file when I share a prototype?

It depends on the plan and settings. A prototype-only link keeps the full file private, and it is a paid-plan feature in the tool we cited above. On free tiers, viewers may be able to open the source from the prototype, so check before you send.

Will my client see updates after I change the design?

Not always. Some review links are snapshots of the version at the moment you created them. Create a new link for each major revision and name the version in your message. With Yonderly, you upload a replacement file and devices swap to it, so the client does not need a new link.

How can I share a prototype when there is no Wi-Fi?

A browser link needs a connection. Deliver the prototype as content on the device ahead of the meeting instead. Yonderly supports offline access on iOS, Android, Windows and the web, so the client can open it without a signal.

Use a link for design review and quick feedback. Use a published page or device delivery when the client needs to use the work, bookmark it or return to it over several weeks.

Sources